Kahaan Enterprises.

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works , Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-8 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

Standard Accessories:

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

Optional Accessories:

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Guard, Brake Motor
• Extra Chuck Back Plate
• Two Pin Guide

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works , Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-8 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

Standard Accessories:

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

Optional Accessories:

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Guard, Brake Motor
• Extra Chuck Back Plate
• Two Pin Guide

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works , Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-8 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

Standard Accessories:

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

Optional Accessories:

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Guard, Brake Motor
• Extra Chuck Back Plate
• Two Pin Guide

Minimum order quantity: 1 Unit

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works, Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-6 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Extra Chuck Back Plate
• Two Pin Guide
• Guard, Brake Motor

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works , Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-8 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

Standard Accessories:

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

Optional Accessories:

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Guard, Brake Motor
• Extra Chuck Back Plate
• Two Pin Guide

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works , Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-8 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

Standard Accessories:

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

Optional Accessories:

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Guard, Brake Motor
• Extra Chuck Back Plate
• Two Pin Guide

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works, Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-6 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Extra Chuck Back Plate
• Two Pin Guide
• Guard, Brake Motor

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works, Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-6 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Extra Chuck Back Plate
• Two Pin Guide
• Guard, Brake Motor

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works, Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-6 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Extra Chuck Back Plate
• Two Pin Guide
• Guard, Brake Motor

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works, Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-6 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Extra Chuck Back Plate
• Two Pin Guide
• Guard, Brake Motor

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works, Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-6 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Extra Chuck Back Plate
• Two Pin Guide
• Guard, Brake Motor

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works, Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-6 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Extra Chuck Back Plate
• Two Pin Guide
• Guard, Brake Motor

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

Minimum order quantity: 1 Unit

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 1060. The Gears are equipped to obtain different speeds, which can be more than 12 spindle speeds. This Machine is Widely used in automobiles, aerospace, textile, Die Works , Defense, Rough Turning, Facing Etc.

Features:

• Flame Hardened Bed Ways
• Rigid Headstock design for better performance of the machines
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• A2-8 type Spindle with EN-8 material for better Rigidity
• RPM Range 12 speed 30 to 1060
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden

• Flame Harden Bed Ways
• Centre Adaptor
• Tool Post Spanner
• Three Pin Guide
• Change Gear Set (For Metric and Inch Both)
• Norton Gear Box.
• Chuck Back Plate
• Dead Centre-2nos.
• Motor Pulley
• Thread Dial Indicator

• Face Plate
• Carrier Plate
• Tapper Turning Attchment
• Motorised Coolant Pump With Tank and Fittings
• Rear Tool Post With Extended Cross Slide and Electricals (Motor, Panel Board, Wiring, Push Button Switch "V" - Belts and Fittings)
• Switch Shaft and Chip
• Guard, Brake Motor
• Extra Chuck Back Plate
• Two Pin Guide

"Nagmani Lathe" offers wide range of lathe machines of various sizes, specifications and features depending on the Customer requirement. our Lathe Machines are extensively used in various fields like automobiles/ Rubber Roller / Sugar mill / Paper mill / heavy engineering and over & above all general engineerint maintenance workshop

Extra Heavy Duty Geared Head Lathe Machine is specially Designed for the High RPM Upto 310. The Gears are equipped to obtain different speeds, which can be more than 9 Spindle speeds. This Machine is Widely used in Heavy Rubber Roll Mill, Extra Heavy Works, automobiles, power plants, aerospace, Etc

Features:

• Flame Hardened Bed Ways
• Head stock Gears are made up of Special Alloy steel with Hardening processes
• Headstock Spindle runs on one Tapper Roller Bearing and one Ball Bearing in the Front Side and one Tapper Rollers on the Rear Side.
• Rigid Headstock design for better performance of the machines
• A2-11 type Spindle with EN-8 material for better Rigidity
• Accuracy as per IS Standard
• Tailstock Spindle EN-8 Harden
• RPM Range 8 speed 19 to 200

We Deal in Geared Head Light Duty Lathe Machine.

Features:

• Precisely designed
• Reliable operation
• Smooth functioning
• Durable finish standards
• High efficiency
• Longer service life

Minimum order quantity: 1 Unit

Light Duty All Geared Lathe Machine offered come designed and developed using latest technology support and feature water cooled working support and large working area for successfully handling of different jobs. These machines also come with advanced vacuum system and stepper motor support for delivering consistent performance. Some of its features include linear guided orbit for X and Y axis for high precision working, high speed stepper drivers, convenient operation support, high power water cooled inverter-drive spindle, suitable for use with materials like wood, plastic, wave board, PVC, acrylic, light marble and other nonmetal materials.

Light duty Geared Head lathe machines are used for small and micro Components and Engineering technical training institutes and Polytechnic Colleges

• High operational fluency
• Proper functioning
• Fully automatic